+
+
+
+

About company


ATERIAL FOR ISOLATION AND ACOUSTIC INSULATION VIBRATIONS, VIBROFILTR, IN PRODUCTION OF THE YEAR 2005 BY TECHNOLOGY German company "BAUMÜLLER" THE GERMAN MACHINES, BY "NACJONALNE TECHNOLOGIES" IN THE CITY Ivanovo, Russia.

VIBROFILTR material is used for forming a layer of waterproof insulating vibrations in cars and other places where there is also a need for sound insulation, protection against vibration and corrosion.

Vibration damping material has a multilayer structure and comprises a layer of ecologically pure composition of butyl rubber and aluminium foil. In contrast to the materials, for the production of aluminium is used VIBROFILTR of increased viscosity is obtainable by a specific process. As a result, the material has an increased frequency range impact factor Loss Mechanical (ILC).

VIBROFILTR has Sealing properties, has good anticorrosion characteristics, and adhesion to the metal. The material is pliable and flexible, easy to install, easily conforms to uneven surface and, thanks to the polymer layer of the adhesive does not require a pre-heat prior to installation.

Insulation material VIBROFILTR - the best choice for the optimal combination of performance characteristics, ease of installation and cost.

We invite you to contact us by phone

+48 694 457 660

Our products

X

Vibrofiltr 1,5 mm

Waterproofing vibro absorbing self-adhesive material "Vibrofilter"

The main use of the material of this brand: vibroabsorbing and waterproofingproperties of the coveringsof vehicles, agricultural machinery.

Main characteristics:

Indicator : WF 1,5 mm
Thickness, mm : 1.5 ± 0.1мм
Weight of 1 m², kg, not less : 2.5
Foil thickness, mN : 100 mkH
Size of sheet, m : 0,5х0,7 m
Number of pieces / m2 : 25/8.75 m2

Mechanical loss coefficient at 200 Hz, standard units :

0.25
The bond strength of material with metal surface while peeling N / cm ², not less : 6
The stability of the adhesive polymer layer to the effect of temperature 90º C during the period of 24 hours : Peeling is not allowed
The bond strength of siliconized paper with the adhesive polymer layer N / cm ² : 0.05-0.15
Flammability (rate of combustion, mm / min, not more) :
Not flammable, self-extinguishing (100)
X

Vibrofiltr 2 mm

Waterproofing vibro absorbing self-adhesive material "VIBROFILTR"

The main use of the material of this brand: vibroabsorbing and waterproofingcoveringof vehicles.

Main characteristics:

Indicator: WF 2 mm
Thickness, mm : 2.0 ± 0.1мм
Weight of 1 m², kg, not less : 3
Foil thickness, mN : 100
Size of sheet, m : 0,5х0,7 m
Number of pieces / m2 : 20/7m2
Mechanical loss coefficient at 200 Hz, standard units : 0.38
The bond strength of material with metal surface while peeling N / cm ², not less : 6
The stability of the adhesive polymer layer to the effect of temperature 90º C during the period of 24 hours
Peeling is not allowed
The bond strength of siliconized paper with the adhesive polymer layer N / cm ² 0.05-0.15
Flammability (rate of combustion, mm / min, not more) samo gasnący (100)
X

Vibrofiltr 3 mm

Waterproofing vibro absorbing self-adhesive material "VIBROFILTR"

The main use of the material of this brand: vibroabsorbing and waterproofingcoveringof vehicles.

Main characteristics:

Indicator: WF 3 mm
Thickness, mm : 3.0 ± 0.2мм
Weight of 1 m², kg, not less : 4,5
Foil thickness, mN : 100
Size of sheet, m : 0,5х0,7 m
Number of pieces / m2 : 15/5,25m2
Mechanical loss coefficient at 200 Hz, standard units : 0.50
The bond strength of material with metal surface while peeling N / cm ², not less : 6
The stability of the adhesive polymer layer to the effect of temperature 90º C during the period of 24 hours
Peeling is not allowed
The bond strength of siliconized paper with the adhesive polymer layer N / cm ² 0.05-0.15
Flammability (rate of combustion, mm / min, not more) Not flammable, self-extinguishing (100)
X

Vibrofiltr 4 mm

Waterproofing vibro absorbing self-adhesive material "VIBROFILTR"

The main use of the material of this brand: vibroabsorbing and waterproofingcoveringof vehicles.

Main characteristics:

Indicator: WF 4 mm
Thickness, mm : 4.0 ± 0.2мм
Weight of 1 m², kg, not less : 6,4
Foil thickness, mN : 100
Size of sheet, m : 0,5х0,7 m
Number of pieces / m2 : 10/3,5m2
Mechanical loss coefficient at 200 Hz, standard units : 0.60
The bond strength of material with metal surface while peeling N / cm ², not less : 6
The stability of the adhesive polymer layer to the effect of temperature 90º C during the period of 24 hours
Peeling is not allowed
The bond strength of siliconized paper with the adhesive polymer layer N / cm ² 0.05-0.15
Flammability (rate of combustion, mm / min, not more) Not flammable, self-extinguishing (100)
X

Rubber foam 6 mm

Rubber foam 6 mm - jest to termo i ciepło izolacyjny materiał na bazie spienionego kauczuku, posiada właściwości absorbcji i tłumienia dźwięku. Jest bardzo plastyczny, co pozwala na wykorzystanie materiału do obróbki trudnych powierzchni w różnych warunkach eksploatacyjnych.

Produkt odporny na olej oraz niepalny, nie wydziela toksyny, co umożliwia zastosowanie go na wszystkich powierzchniach karoserii oraz w komorze silnika.

Technical data :

  • Base: foamed rubber

  • Roll size: 1,00 х30 m (30 m2)

  • Use temperature С: от -200 до +105

  • Density: 65±25 кг/м3

  • Environment friendly : no asbestos ; no CFC–HCFC

  • Sound insulation DIN 4109: do 36 dB(А)

  • Thermal conductivity: 0,32-0,34 Вт/м2
  • Color: black


X

Rubber foam 10 mm

Rubber foam 10 mm – jest to termo i ciepło izolacyjny materiał na bazie spienionego kauczuku, posiada właściwości absorbcji i tłumienia dźwięku. Jest bardzo plastyczny, co pozwala na wykorzystanie materiału do obróbki trudnych powierzchni w różnych warunkach eksploatacyjnych.

Produkt odporny na olej oraz niepalny, nie wydziela toksyny, co umożliwia zastosowanie go na wszystkich powierzchniach karoserii oraz w komorze silnika.

Technical data :

  • Base: foamed rubber

  • Roll size: 1,00 х10 m (10 m2)
  • Use temperature С: от -200 до +105

  • Density: 65±25 kg/m3

  • Environment friendly : no asbestos ; no CFC–HCFC
  • Sound insulation DIN 4109: do 36 dB(А)

  • Thermal conductivity : 0,32-0,34 λ W/(mK)

  • Color: black


X

Autoshim MIX 8

Noise Isolation Autoshim Mix 8 mm is a foam material made of flexible polyurethane foam crushed into flakes and glued together with chemically active adhesives under high pressure. In simple words, this is a well-known dense foam rubber crushed into fine chips and glued with a special adhesive under high pressure. Due to this, the new material has a higher density and wear resistance than regular foam rubber, and the thermal noise insulation properties have increased by more than 2 times (assuming the same material thickness).

Main characteristics:


  • Thickness, mm 8
  • Sheet length, 500 mm
  • Width of a sheet, 500 mm
  • The number of packaging sheets: 10
  • Amount in a package (m²): 2.5
  • Glue layer: one-sided, protected by paper or film
  • Package weight not more than 2 kg.
  • Recommended installation temperature: + 10ºC to + 30ºC
  • Temperature range of use and operation: -40ºC to + 100ºC
  • Color: gray or white
  • Density: 160 kg / m3
X

Autoshim Black Flex 6 mm

Autoshim Black Flex 6 mm - it is thermo and heat insulating material based on foamed rubber, has the properties of absorption and sound attenuation. It is very plastic, which allows the material to be used to treat difficult surfaces under various operating conditions.

The product is oil resistant and non-flammable, does not emit toxins, which allows it to be used on all surfaces of the body and in the engine compartment.

Technical data:


  • Base: foamed rubber
  • Size sheet: 50*50 cm – 15 sheets/pack
  • Usage temperature С: - 40 to +85
  • Density: 65 ± 25 kg / m3
  • Environmentally friendly: no asbestos; No CFC-HCFC
  • Sound insulation DIN 4109: up to 36 dB (А)
  • Thermal conductivity: 0.32-0.34 λ W/(mK)
  • Black Colour
X

Autoshim Black Flex 10 mm

Autoshim Black Flex 10 mm - it is thermo and heat insulating material based on foamed rubber, has properties of absorption and sound attenuation. It is very plastic, which allows the material to be used to treat difficult surfaces under various operating conditions.

The product is oil resistant and non-flammable, does not emit toxins, which allows it to be used on all surfaces of the body and in the engine compartment.


Technical data:


  • Base: foamed rubber
  • Size sheet: 50*50 cm – 10 sheets/pack
  • Use temperature С: - 40 to + 85
  • Density: 65 ± 25 kg / m3
  • Environmentally friendly: no asbestos; No CFC-HCFC
  • Sound insulation DIN 4109: up to 36 dB (А)
  • Thermal conductivity: 0.32-0.34 λ W/(mK)
  • Black Colour
X

Felt Acoustic 8

Material: self-adhesive needle-punched synthetic non-woven material, which is made by interlacing and subsequent mechanical glue-free pressing of fibers, the basis of which is a felt silencer. Acrylic glue, protected by anti-adhesive film or paper, is applied on felt on one side.

The main application of the material of this brand: the material is intended for use as heat, sound insulation of the cabin of cars of all types.

Main characteristics:


  • Thickness, mm 8
  • Sheet length, 750 mm
  • Width of a sheet, 500 mm
  • The number of packaging sheets: 20
  • Amount in a package (m²): 7.5
  • Glue layer: one-sided, protected by paper or film
  • Package weight not more than 6 kg.
  • Color: gray
  • Density: g / m2 650
X

Felt Acoustic 10

Material: self-adhesive needle-punched synthetic non-woven material, which is made by interlacing and subsequent mechanical glue-free pressing of fibers, the basis of which is a felt silencer. Acrylic glue, protected by anti-adhesive film or paper, is applied on felt on one side.

The main application of the material of this brand: the material is intended for use as heat, sound insulation of the cabin of cars of all types.

Main characteristics:


  • Thickness, mm 10
  • Sheet length, 800 mm
  • Width of a sheet, 500 mm
  • The number of packaging sheets: 15
  • Amount in a package (m²): 6
  • Glue layer: one-sided, protected by paper or film
  • Package weight not more than 6.2 kg.
  • Color: gray
  • Density: g / m2 800


X

Felt Acoustic 14

Material: self-adhesive needle-punched synthetic non-woven material, which is made by interlacing and subsequent mechanical glue-free pressing of fibers, the basis of which is a felt silencer. Acrylic glue, protected by anti-adhesive film or paper, is applied on felt on one side.

The main application of the material of this brand: the material is intended for use as heat, sound insulation of the cabin of cars of all types.


Main characteristics:


  • Thickness, mm 14
  • Sheet length, 800 mm
  • Width of a sheet, 500 mm
  • The number of packaging sheets: 7
  • Amount in a package (m²): 2.8
  • Glue layer: one-sided, protected by paper or film
  • Package weight not more than 4.7 kg.
  • Color: gray
  • Density: g / m2 1500


X

Madeline

Material: self-adhesive cushioning material based on non-woven polyester fiber fabric, having a solid adhesive coating on one side, protected with a release film.

The main use of the material of this brand: the material is intended for use as a gasket and parts of various vehicles.

Main characteristics :


  • Thickness, mm 1
  • Density: 75 g / m2
  • Sheet length: 1000 mm
  • Sheet width: 250 mm
  • The number of packaging sheets: 10
  • Packing quantity (m ²): 2,5
  • Glue layer: one-sided, protected by paper or film
  • Package weight not more than 0.9 kg.
  • Black colour
  • Breaking stress, MPa, not less than 0.15
  • The bond strength of the material with a bearing surface of not less than 3.5 N / m
  • Fire resistance, burning rate, not more than 100 mm / min
X

PPE ECO 4

Material: self-adhesive material is physically crosslinked polyethylene foam with adhesive layer, it is a heat-insulating and sound-proof material in sheets of gray flowers. Acrylic glue, protected with a release film or paper, is applied to the foamed polyethylene foam on one side.

The main application of the material of this brand: the material is intended for use as heat, soundproofing of all types of cars.


Main characteristics:


  • Thickness, mm 4
  • Sheet length, 750 mm
  • Sheet width, 500 mm
  • Amount in a package (m²): 3.75
  • Adhesive layer: one-sided, protected by paper or film
  • Package weight not more than 2 kg.
  • Color: gray
  • Adhesion force to steel, more than 3N / cm
  • Density: 33kg / m3


X

PPE ECO 8 Foil

Material: self-adhesive material is physically cross linked polyethylene foam with adhesive layer, it is a heat-insulating and sound-proof material in sheets of gray flowers. Acrylic glue, protected with a release film or paper, is applied on one side of the foamed polyethylene foam.

The main application of the material of this brand: the material is intended for use as heat, soundproofing of all types of cars.


Main characteristics:


  • Thickness, mm 8
  • Sheet length, 750 mm
  • Sheet width, 500 mm
  • Amount in a package (m²): 3.75
  • Coating: aluminum foil
  • Adhesive layer: one-sided, protected by paper or film
  • Package weight not more than 4 kg.
  • Color: gray
  • Adhesion force to steel, more than 3N / cm
  • Density: 33kg / m3
We invite you to contact us to discuss the detailed offer.

Range of applications


Vibration isolation "Vibrofiltr"


This material is intended for use in cars, buses, buildings engineering vessels, which are placed requirements effectively reducing noise and vibration.

  • VIBRATION ISOLATING cover and waterproof vehicles, agricultural machines (including acoustic tuning, vibration damping boats, yachts, reduction of noise in the gear elevators).
  • VIBRATION ISOLATING cover and watertight in industrial, construction, components with high load vibrating beneath the ground (foundation structures, pipes, communication systems)

Video

Sound insulation for cars


Sound-proofing and anti-vibration materials are used to reduce the acoustic noise levels in rooms, vehicles and other objects, which are placed such noise sources, like generators, engines, compressors and so on. for noise insulation materials can perform the functions of vibration absorption and sound absorption.

The modern market offers a wide range of vibration-damping and sound-insulating materials with different technical characteristics, parameters and external price level. Each manufacturer has developed its own technological advice on the use of manufactured materials for sound insulation.

Vibration absorption for many materials used noise insulation effect elastic deformation of the butyl rubber (e.g. VIBROFILTR) or a bituminous layer. To achieve the effect of sound absorption materials are used containing a layer of foamed fine celled foam (PES) or polyurethane which absorbs sound waves. Sound insulation materials are installed, as a rule, over antivibration. Currently, the most common are antivibration materials containing viscous composition of the composites.

Depending on the technology of installation materials for vibration isolation can be self-adhesive (VIBROFILTR) or coated with a layer of glue thermo-adhesive. Application of the latest material on the work surface is more time-consuming, since only after heating of industrial dryers, so many experts prefer to use the materials from the self-adhesive layer.

Resilient materials suppress low frequency noise (20 to 500 Hz).
Selecting materials largely depends on the thickness of the coating to which it is applied.

For the absorption of high-frequency noise sound-absorbing materials are used, containing a layer of finely porous foamed polyethylene foam (PES) or polyurethane foam that absorbs sound waves. Sound insulation materials are installed, as a rule, over antivibration. The efficiency of sound insulating materials depends on its thickness: the thicker the material, the greater the absorption. As vibration damping, many kinds of soundproofing materials have a protective coating that protects the material against moisture, chemicals and other effects. Mandatory requirement to cover any sound-proofing material - acoustic permeability: the sound wave must penetrate the protective coating layer of finely porous material, in which sound vibrations are damped. Sound-proof materials from the fine-pored structure also have a significant insulating effect.

ContactWe invite you to contact us to discuss the detailed offer.

KMC SERVICES,
32-085 Modlniczka,
Ul. Komandosów 1,
Magazyn nr 1

Продажа в Москве и Московской области:
+7(495)532-67-23
ICQ: 415-452-925
We invite you to contact us by phone
+7(4932)22-33-22
+7(4932)41-19-23
+7(905)155-62-44